Zippy Pouch Along - preparing the pieces and zipper tips by fabricandflowers | Sonia Spence
Patterns,  sewing

Zippy Pouch Along – constructing the zip band, lining and pocket sides

NOTE: this post may contain affiliate links. It will not cost you any money if you click on them and just means that I get a small commission for recommending it.

Hello there! Shall we get started with the (Not So) Little Zippy Pouch?! You may find it helpful – if you haven’t done so already – to print out the Cutting Instructions (page 4/5) and the Measurement Guide (page 18/19) relevant to the pouch size you are making. Although not necessary, you may find it helps to keep a track of the pattern if you are working off a screen.

Zippy Pouch Along - preparing the pieces and zipper tips by fabricandflowers | Sonia Spence

I’m making a Not So Little Zippy pouch and have made a patchwork front panel with some lovely scraps I had lying around. I ironed my favourite interfacing to the back – I find it sticks well and adds a nice weight/stability to the fabric without making it feel stiff and horrible –  as I have run out of fusible wadding before layering with some wadding to quilt. Depending on the quilting that you do, it may be beneficial to baste around the finished edges of the panel to secure everything in place.

Constructing the Zip Band

If you’ve not used zips much before, I have personally found that adding tabs to the end of the zip seem to make them a lot easier to work with as it seems to stabilise them! The tutorial here details how to add the zip tabs. Some other tips that may help with inserting the zipper (or any zip actually!);

Zippy Pouch Along - preparing the pieces and zipper tips by fabricandflowers | Sonia Spence
  • Pin the fabric/tabs in position with the pins at right angles to the seam that you are going to be sewing. 
  • For the tabs, if you can position the pins close to the zip, when you place the fabric under the machine you can add a couple of stitches to secure everything in place before taking the pins out.
  • Measure both sides of the zip for accuracy when marking.
  • When sewing the zip to the band pieces, begin sewing each side from the same end. This will mean that if there is any fabric creep, it will end up at the same end meaning you only need to trim one side, helping with accuracy.
Zippy Pouch Along - preparing the pieces and zipper tips by fabricandflowers | Sonia Spence

The Pocket Sides

When making the pocket sides, the only thing to really watch is when trimming around the excess fabric around the tab: you need to snip right up into the corner, but not through the stitching. Then, when turning to the right side, press from the top edge towards the bottom tab. Even then, the sides of the tab can still be a little bouncy! I have found that using scissors/seam ripper to gently hold the side out will help create a straight edge. 

Zippy Pouch Along - preparing the pieces and zipper tips by fabricandflowers | Sonia Spence

Bag lining & Internal Zip Pocket

Using some of the zipper tips from above, sew the pockets and pouch lining together. If your zip is slightly longer than even better as it means you can keep the zip pull up and out the way and you won’t need to move it at all whilst sewing the zip in!!!

Zippy Pouch Along - preparing the pieces and zipper tips by fabricandflowers | Sonia Spence
Zippy Pouch Along - preparing the pieces and zipper tips by fabricandflowers | Sonia Spence

To close the bottom of the pocket (Step 20), ensure that you fold at the zip and if necessary use pins to keep the top lining edges straight. Smooth the fabric down from the zip, measure and mark the line that you will be sewing.  Once you have completed this step, the bottom of the pocket will be closed. When you have shaped the side of the pocket you can baste the edges together – which can be beneficial if you are not adding the pocket sides on straight away.

Adding Slip Pockets

In an attempt to be ultra organised (ha!) I’m adding two slip pockets to this version. For one of them, I thought it would be handy to create a divide with a pocket big enough to keep pens/scissors so that they don’t disappear to the very bottom of the bag. 

Zippy Pouch Along - preparing the pieces and zipper tips by fabricandflowers | Sonia Spence

To do this, I made a slip pocket following the pattern up to Step 3, before attaching it to the lining. I measured 3″ in from one side and using a hera marker drew a line. Starting at the bottom of the pocket, I stitched up to the top of the pocket, adding a stitched triangle to help reinforce the seam.

And there we go! That is all of our pouch elements prepped and ready to be put together – come back for our next post where we will add the pocket sides and join the layers together!!!

Zippy Pouch Along - preparing the pieces and zipper tips by fabricandflowers | Sonia Spence

Zippy Pouch Along Timings;

Don’t forget to follow @fabricandflowers and @rosegardenpatchwork and use the hashtag #zippypouchalong so that I can see all the fabulous pouches that you’re making! If you are looking for a copy of the pattern, check out my Etsy shop here. And please do sign-up to my newsletter if you would like any updates or news sent straight to your inbox.

Sx

Today’s sky::: mostly grey and quite chilly!

Leave a Reply

Your email address will not be published. Required fields are marked *